PDA

View Full Version : TiVO to Network Help


BarTopDancer
07-20-2006, 11:06 PM
Now that my network is up and running I am having issues connecting my TiVO to my network.

I have the proper card (a linksys wusb11) and the TiVO recognizes it. The problem comes when I have to enter the password. I tried both passwords (not sure which one it wants) and both times it says the network is not found (after I had already selected it from the TiVO menu.

I turned off my MAC filter thinking that would help (I previously had added it into my MAC filter list but it still didn't work).

Ideas?

Prudence
07-20-2006, 11:10 PM
Have you tried breaking something expensive in front of your electronics?

Andrew
07-20-2006, 11:19 PM
The password it wants is the same one you're using for WEP or WPA encryption on your wireless access point.

BarTopDancer
07-21-2006, 07:17 AM
Andrew,

That is what I was using and it said it couldn't find the network (after already bringing it up for me to select).

Andrew
07-21-2006, 08:31 AM
Dear BTD,

Try turning off WEP/WPA at the router and see if you can connect with no encryption. If that works and encryption doesn't, try changing the transmission channel; most access points come configured for channel 6, but you can also use 1 or 11, and if there are other nearby access points on channel 6 you might be getting interference.

BarTopDancer
08-05-2006, 11:43 AM
Dear BTD,

Try turning off WEP/WPA at the router and see if you can connect with no encryption. If that works and encryption doesn't, try changing the transmission channel; most access points come configured for channel 6, but you can also use 1 or 11, and if there are other nearby access points on channel 6 you might be getting interference.

OK, I did that, and was able to connect. When I turned the encryption back on the network no longer recognized the TIVO. How do I configure it to recognize the TIVO and remain encrypted?

Kevy Baby
08-06-2006, 04:57 PM
OK, I did that, and was able to connect. When I turned the encryption back on the network no longer recognized the TIVO. How do I configure it to recognize the TIVO and remain encrypted?
Try turning off WEP/WPA at the router and see if you can connect with no encryption. If that works and encryption doesn't, try changing the transmission channel; most access points come configured for channel 6, but you can also use 1 or 11, and if there are other nearby access points on channel 6 you might be getting interference..

BarTopDancer
08-06-2006, 08:58 PM
KB, I tried that. I noticed I have WPA with TKIP security and the TIVO is asking for WEP security. Maybe that has something to do with it. I'll have to try reconfiguring my settings.