Building a treadmill desk

[scaeagles]

Going to the ground is a good idea, but it is a little difficult to tell from the pics if if that works because of the legs at the bottom of the treadmill.

Another idea it to being the desk supports down a bit from the arms and run another piece of wood or something back around the main support arm (gray with "nordictrack" on them) so that the desk doesn't slide forward.

[Moonliner]

Originally Posted by scaeagles

Going to the ground is a good idea, but it is a little difficult to tell from the pics if if that works because of the legs at the bottom of the treadmill.

Yes. A post pushed up against the end of the arms would just clear the legs. It fact I might be able to attach it to the leg for extra stability.

Originally Posted by scaeagles

Another idea it to being the desk supports down a bit from the arms and run another piece of wood or something back around the main support arm (gray with "nordictrack" on them) so that the desk doesn't slide forward.

I don't think that's an issue since the front of the desk is already up against the instrument panel.